Bell Cheek Pads For Mag-9 Sena Helmets
- Riders will sometimes need to change the cheek pads that come installed in their helmets. Some people need a little more or less space, while others simply need to install a fresh set of pads for better comfort (and smell).
- The pads both come out and can be installed quite easily.
- Use the chart below to figure out what size cheek pad you currently have based on your helmet size, and then pick a replacement set based on your need.
Share this page on Twitter!
View Larger Images
Sizing Information
Use this table to determine what cheek pad size you currently have.
| Helmet Size | Cheek Pad Size |
|---|---|
| XS | 55mm |
| Small | 50mm |
| Medium | 45mm |
| Large | 40mm |
| XL | 40mm |
| XXL | 35mm |
You can buy the same thickness of cheek pad if you like the fit of your helmet and just need a replacement set. Or you can buy a different thickness cheek pad to adjust fit as all the cheek pads are interchangeable between the different helmet sizes. In addition to the cheek pad thicknesses listed above, there are three optional thicknesses: 25mm, 30mm and 60mm.
Changing cheek pads to change the helmet fit: To get MORE room in your helmet, you need to buy a SMALLER cheek pad. To get a TIGHTER fit, you need to buy a LARGER cheek pad. Example: If you have a size Large Mag-9 helmet, you have cheek pads that measure 35mm. If the helmet is too tight on you, a 25mm or 30mm pad would give you more room.
