HJC Cheek Pads For RPHA 90 and RPHA 90s Helmets
- Works with HJC RPHA 90 and RPHA 90s helmets only. They do not fit the RPHA 90s Carbon helmets.
- Riders will sometimes need to change the cheek pads that come installed in their helmets. Some people need a little more or less space, while others simply need to install a fresh set of pads for better comfort (and smell).
- The pads both come out and can be installed quite easily. Simply slide the pad into the shell and snap the closures into place.
- Use the chart below to figure out what size cheek pad you currently have based on your helmet size, and then pick a replacement set based on your need.
Here is a link to HJC’s website where you can download helmet manuals by model. You’ll find information on installing and removing shields, base plates, cheek pads, chin curtains, etc, as well as helmet care and cleaning.
Share this page on Twitter!
View Larger Images
Sizing Information
These cheek pads fit the RPHA 90 and the RPHA 90s helmets. They do not fit the RPHA 90s Carbon helmets.
Use this table to determine what cheek pad size you currently have:
| Helmet Size | Cheek Pad Size |
|---|---|
| XS | 35mm |
| Small | 30mm |
| Medium | 30mm |
| Large | 25mm |
| XL | 25mm |
| XXL | 20mm |
You can buy the same thickness of cheek pad if you like the fit of your helmet and just need a replacement set. Or you can buy a different thickness cheek pad to adjust fit.
Changing cheek pads to change the helmet fit: To get MORE room in your helmet, you need to buy a SMALLER cheek pad. To get a TIGHTER fit, you need to buy a LARGER cheek pad. Example: If you have a size Large helmet, you have cheek pads that measure 25mm. If the helmet is too tight on you, a 20mm pad would give you more room.
