REV'IT! Control H2O Air Jacket :: MotorcycleGear.com

REV'IT! Control H2O Air Jacket

For sport street riders looking for a heavily ventilated jacket (with a waterproofing component) that also want the aesthetic of speed wrapped into a CE-class AA jacket, we bring you the Control Air H2O.

Its own vibe When we created the Control Air H2O jacket, we had a very distinct vision. It was to be the seamless blending of both motorsport (think hard parts at the shoulders) and sportswear (think lamination around the zippers and tonal graphic prints). And unlike in the past – where any item in a “family” of jackets/pants/one-pieces – echoed almost identical aesthetics, we did something new. The Control Air H2O jacket is not a direct copy of leather series (jacket and one-piece suit); however, we took the graphics story of the ergonomic gradient shapes built out of diamonds and applied it in its own unique way at the back of the arms. This way, it’s immediately recognizable as a member of the “Control” series, but with its own fashion-focused twist.

Stay cool. Stay dry. The Control Air H2O is heavily ventilated – think about 2/3 (or slightly more) of the front constructed with PWR|Shell mesh, and about the same ratio around back. That said, we recognize not every day will be as hot as another. For the days when you need some protection against the wind and rain, we included a separately wearable hydratex 2L waterproof membrane.

Adjustability:
  • Adjustment strap at waist
  • Adjustment tab at upper arm
Pockets:
  • Two slit pockets on front
  • Waterproof inner pocket within waterproof liner
Lining:
  • Mesh
Features:
  • Jeans loop
  • Short connection zipper
  • Soft edge at collar
Waterproofing:
  • Detachable hydratex|Lite liner
Ventilation:
  • Fully ventilated mesh
Protection:
  • 3D mesh protector pockets
  • Prepared for SEESOFT CE-level 2 Insert Back Protector
  • SEESMART CE-level 1 Elbow Protectors
  • SEESMART CE-level 1 Shoulder Protectors
  • TPU protection at shoulder
  • Outer shell material:
  • High density polyester 600D
  • Polyester ripstop
  • PWR|Shell mesh
Visibility:
  • Laminated reflection on back
CERTIFICATION:
  • This garment is certified according to the EN 17092 Standard, published in 2020 and has achieved AA rating.

Tweet_button Share this page on Twitter!

$20 Promotional Gift Card available on this product!
$20.00
Purchase this product and receive a promotional gift card!
Read on for more details.
 
Free Shipping on All Orders over $89!
Our Price:
$299.99

Sizing Information

We tried a size Medium and an XL on our Fit Check mannequins Huey and Dewey. Those are sizes they usually wear in an “American” cut jacket. This jacket from REV’IT! fits well enough and it looks sharp, but there is very minimal room left. Many brands from Europe exhibit a fit like this, such as Alpinestars. If you look at REV’IT!’s published size chart (below), you’ll see their estimate of chest size is at least a full size smaller than what you’d find in equivalent US designed clothing.

We measured each jacket and tried them on and we’ve concluded that the fit is just about one-half size smaller than what you would find in ordinary US men’s clothing. The amount the jackets are undersized is not as severe as REV’IT!’s size chart would have you believe. For most people, this means you’ll be able to buy the size you normally wear if you want a snug, European style fit. If you want a looser American fit, or if you are between sizes, choose one size larger.

Below is the REV’IT!-published chest size for each jacket’s alpha size along with our estimate of max chest and max waist/belly. This particular style is a sport/street style so there is only a moderate taper from chest to waist, and with a style like this you can effectively tailor the fit of the waist with the side waist adjusters, which makes the jacket look great and fit great, so don’t worry if your waist/belly is smaller than the max. We only list this for those that have a belly so they can know what minimum size they’d have to choose to fit the belly.

Note: Add about 1” to your chest and belly measurements if you plan to add a back protector. Add an additional 1” inch to your chest if you will add the chest protectors.

Jacket Size REV’IT! Published
Max Chest
Our Estimate
of Max Chest
Our Estimate
of Max Belly/Waist
Small 34-37 37-39 36
Medium 37-39 39-41 38
Large 40-41 41-43 40
XL 42-44 43-45 42
XXL 44-46 45-47 44
XXXL 47-49 47-49 46

Need help measuring? Get it here

Our Two Cents

The Control Air H20 Jacket from REV’IT! is a sport/street jacket that is heavily ventilated and built to resemble the aesthetic of the sport/race Control Jacket from REV’IT!. Keep in mind this is not simply a ventilated or air version of the Control Jacket, it is it’s own jacket and only relates to the Control Jacket in terms of the graphics design, and not the overall look and style. This is different as normally with REV’IT! When you have a number of products in the same “family” they will be visually similar and will follow almost identical designs, not the case here. The Control Air H20 jacket is heavily ventilated with a sold 2/3rds of the front and the back of the jacket being constructed with PWR | Shell mesh, but the jacket is still adaptive as im sure you noticed the H2O in its name as it does feature a separately wearable hydrate 2L waterproof membrane.

Even though this jacket shares its name with the Control sport jacket it does not have a sport fit, rather it has a regular fit that is far more comfortable. And speaking of comfort, there is an adjustment strap at the waist, and adjustment tabs at the upper arms. Also a full mesh liner is included to further aid comfort and the collar has a soft edge which is always welcome. Convenience features include two slit pockets on the front, a waterproof inner pocket within the waterproof liner (a find that having a waterproof pocket is almost a must for longer rider just in case the weather changes) and The Control Air H2O jacket does come with jeans loops and a short connection zipper to make pairing to pants simple.

Lets talk protection, High Density Polyester 600D, PWR | Shell Mesh and Polyester Ripstop construction aid in achieving CE Level AA abrasion resistance and impact protection is covered by the included SEESMART CE-level 1 Elbow and Shoulder Protectors. There is also a pocket for the SEESOFT CE-level 2 back protector insert as well as TPU protection at the shoulders. Last but not least, there is laminated reflection on the back to help with nighttime visibility.

Overall I think that the Control Air H2O jacket from REV’IT! Follows what has been a very successful formula for REV’IT! in making great sport jackets as this one is no exception. Compared to for example the Airwave 4, another warm weather, mesh, AA rated jacket from REV’IT!, the Control Air H2O is a bit more stiff and tight as it is a sport style jacket rather than an adventure jacket, but don’t let that fool you, it is still very comfortable for a sport style jacket. I would argue, if you are familiar with other REV’IT! Jackets, that it is more inline with a sport jacket built like the Matador or Paralax rather than a full blow sport/race build like its name sharing counterpart the Control Jacket or even the Argon 2 Jacket. Overall it is a very comfortable jacket considering the TPU shoulders and sport build. Also, like the Airwave 4, I don’t believe the pictures do it justice as I do think it looks better in person and when tried on, though I will say that I am not a fan of the blue color way as the blue is more of a blurple rather than a blue. :: Damir 4/23/24

Reviews