REV'IT! Ignition 4 H2O Pant
These sporty, fourth-generation motorcycle pants are designed to go the distance. Wherever you roam, the protection – and durability – of premium-grade materials won’t let you down. Comfortable, high-quality cowhide leather wraps around you at the hips, outer thighs, and rear, while mesh and stretch PWR|Shell panels enhance fit and function by optimizing airflow – the Ignition 4 H2O were engineered to ignite your sense of adventure.
Confidence in any conditions Across all seasons, you’ll be reassured when you pull on the Ignition 4 H2O pants. Riding further means being met by diverse – often adverse – conditions. From the unpredictable to the extreme, you won’t get caught out by sudden downpours, and wild temperature swings won’t take the edge off the track. Wear with or without the thermal liner – to keep the weather out, and the warmth on the inside.
Protection while you push on Long days in the seat demand premium protection, and the Ignition’s pre-fitted SEEFLEX CE-Level 2 armor at the knees dovetails with abrasion-resistant leather panels. Plus, SEESMART CE-Level 1 padding at the hips uses an innovative, flexible honeycomb design to absorb impact, encourage airflow, and improve contouring around your waist.
Adjustability:- Adjustable knee protection
- Adjustment strap at waist
- Slit pocket at hip
- Mesh
- Polyamide stretch
- B-lock button closure at front
- Calf zippers
- Long connection zipper
- Prepared for Strapper suspenders
- Short connection zipper
- Stretch at crotch
- Stretch at inside knee
- Stretch at inside of legs
- Stretch at knees
- Stretch at waist
- Detachable hydratex®|Lite liner
- Ventilation panels on lower legs
- Ventilation panels on upper legs
- Coccyx Protection
- Safety seams
- SEEFLEX™ CE-level 2 Knee Protectors
- SEESMART CE-level 1 Hip Protectors
- PWR|Shell mesh
- PWR|Shell stretch
- Reflective fabric at back
- Reflective fabric at front
Read on for more details.
Sizing Information
We measured and tried on a selection of these pants and the main conclusion was that the pants run a bit small in the waist as compared to REV’IT’s published sizing chart. The inseams however are very well represented in their chart.
To help in choosing a size, we’ve developed a chart that shows each pant size and REV’IT’s published size estimate of waist alongside our own estimate of size. We’d advise you to choose a pant size based upon OUR sizing estimates.
As you can see in the chart, the pants are available in regular, short and tall inseam sizes, so choose the inseam you normally wear in slacks or jeans. The pants also have adjustability of the armor height (independent of inseam length) which can be accessed by pulling each leg inside out. Velcro allows you set the armor in different spots and you can check how the armor feels on your knee when you are sitting on the bike and decide which position it seems best. Neat!
Also, the pants have a set of Velcro waist adjusters at the waist to help you fine tune the fit. We indicate a 2” range in our chart which was about the amount we judged the adjustment range to be.
Pant Size | REV’IT Estimate | Our Estimate | Inseam Reg | Inseam Short | Inseam Tall |
---|---|---|---|---|---|
46 | 30-32 | 29-31 | 30 | - | - |
48 | 33-34 | 30-32 | 31 | - | 33 |
50 | 34-35 | 32-34 | 31 | 30 | 34 |
52 | 36-37 | 33-35 | 32 | 30 | 34 |
54 | 38-40 | 35-37 | 32 | 30 | 35 |
56 | 40-42 | 37-39 | 32 | 31 | - |
58 | 42-43 | 38-40 | 33 | - | - |
60 | 44-46 | 41-43 | 33 | - | - |
Measurement tip: You’ll want to measure yourself fairly high up the waist because protective style pants like this are cut to ride higher on your waist than a lot of modern jean styles (so relying just upon the size jeans you buy might result in motorcycle pants that are too small). Right below the navel is about the right height on the waist for measurement. For a pant leg style like this that goes over the boots, you can typically choose an inseam based upon what you normally wear in jeans or slacks.