REVIT Cayenne Pro Pants (S, XL, Or XXL Only)
- PWR shell 750D with Teflon® coating
- PWR shell 1000D with Teflon® coating
- Schoeller®-dynatec mesh panels
- PWR shell 500D stretch
- Leather panels
- Sure grip
- SEEFLEX™ Level 2 CE protection
- TRYONIC SEESOFT™ CE-level 1 type B hip protector, version RV01
- Safety seams
- Laminated reflection
- 90% Polyamide, 7% Leather, 3% Polyester
- Regular, tour fit
- Adjustment straps
- Hook and loop adjustment
- Ventilation panels
- Stretch panels
- Stretch lips
- Calf zippers
- Grip panel at seat
- Aero cool 3D mesh
- YKK slide lock front closure
- Prepared for Strapper suspenders
- Short and long connection zipper
- Slit pockets
- Stash pockets
More info: This document explains some of the features and materials listed above. (Not all REV’IT! products have all the features or materials listed. Use your back button after viewing.)
Please Note: We can ship REV’IT! products to US, US territory or APO/FPO addresses only (per manufacturer’s restrictions).
We measured and tried on a selection of these pants and developed the table below to help you choose a size that is right for you. The waist sizes we are showing are a bit smaller than what REV’IT! publishes in their literature (just an FYI) and a bit smaller than you might expect if you were choosing the size you normally wear in men’s clothing. If you need help measuring, take the link below. The pants have an adjustable strap arrangement at the waist to help you fine tune the fit. We are showing a three inch range which was about what the adjusters seemed to do.
These pants are available in regular, short and tall inseam sizes, so we’ve included inseam lengths in the chart as well.
|Pant Size||Waist Estimate||Inseam Reg||Inseam Short||Inseam Tall|
Our Two Cents
The Cayenne Pro pants and jacket offer a warm to hot weather solution for street or adventure riders that want the best armor protection and the most rugged construction.
The shell of this pant is about 60% textile and 40% mesh. There are two large mesh panels about mid-thigh on the front of the pant and panels of about the same size on the back. In those areas, air will flow directly through, and so consider these pants for use in the warm to hot months of the year. The mesh material used in these pants are a step above what you see in many all, or part mesh riding gear… these are made of Schoeller®-dynatec mesh which is strong! Just feeling it, you can tell it is built to last, but it is flexible so it won’t be uncomfortable. Keep in mind, the Cayenne Pro is NOT a waterproof garment.
The balance of the shell of this pant is textile and very rugged. And then there are reinforcements of leather on the inside of the legs. The leather is for wear resistance and for “grip” on your bikes frame. This is a pretty standard feature in adventure riding gear.
REVIT’s SEEFLEX™ Level 2 armor is included for the knees, which is their best armor. It is breathable and moderately flexible and give a very large coverage area. The armor is installed in a full pocket inside which is softer material to keep it from rubbing you. Level 1 armor is provided for the hips.
The ends of the legs are constructed with the features you find on adventure riding pants. The leg ends are highly adjustable with an adjustments strap and several strips of Velcro. You can use that adjustment to work with the size of boots you wear and also with any knee/shin brace equipment you might use. The leg end has an outside zipper to help you get them on and off.
Check out the waist closure, Its a slide-lock arrangement that is better than either hooks or snaps. This type of closure simply will not come undone on you when you don’t want it to. Need suspenders? Take the line below to REVITs optional Strapper suspender setup.
Yes, these pants are relatively expensive, but the materials and armor system are all top notch. Products you find, such as Klim and this REVIT gear are one of the few you’ll find with the premium features and protection in a summer riding package. :: Paul, 06-12-18
REVIT says: In order to be able to offer a complete breathable and lightweight one-layer outfit the Cayenne Pro trousers have been constructed in the same way as the Cayenne Pro jacket. With an extremely strong and abrasion resistance outer shell, CE protectors at the knees and hips, protective leather panels and laminated reflective components, these trousers offer all safety you’ll need when traveling in warmer climates. The Schoellar®-dynatec® mesh panels, aero cool 3D mesh panels and ventilation panels will make sure you will remain comfortable no matter how hot it gets.