Fieldsheer Lena 3.0 Jacket
- Highly abrasion resistant 500 denier Maxtena-Pro outer shell
- Removable CE approved armor in the shoulders, elbows, and back
- Unique FS Matrix two-stage liner system incorporates a waterproof and breathable liner with Nanomax and Rainguard barrier technology plus an insulated liner to suit rider’s needs
- Adjustable Velcro micro fleece collar with padding
- Four-step adjustable upper and lower sleeve volume control
- Ram Air direct ventilation system, zero membrane ventilation interference
- Adjustable Velcro waist straps ensure a snug fit
- Reflective Phoslite piping for increased nighttime visibility
- Gusseted adjustable Velcro wrist cuffs
- Pockets included: two zipped front hand warmer, one zipped map, one inside Velcro, and one mobile phone pocket
- 8” waist zipper and universal snap belt connector to attach to pants
Check out these similar products:
We put a size Small on Laverne and a Large on Shirley which are the sizes they normally wear and both fit just fine. In checking Fieldsheer’s size chart for 2014 (see below), the chest sizes listed correspond to what we’d expect to fit the two Fit Check mannequins as well.
Therefore, my advice would be to choose a size based upon your chest size. Fieldsheer doesn’t offer a dress size conversion, but often those aren’t consistent anyway. The fit of the waist and hips in this style is pretty forgiving and can be adjusted with the side expansion hip zippers and the waist belts.
Plus sizes are available too. The chest sizes of these jackets covers a larger range as compared to the “regular” cut jackets and also the sleeve sizes are shorter for any given chest size. Sleeve measurements are from the shoulder seam to the end of the cuff.
|Jacket Size||Max Chest||Sleeve|
Our Two Cents
About Fieldsheer for 2014: The Fieldsheer line for 2014 is all new. The line has been dormant (as far as the introduction of new products goes) for 3 or more years, and all that is left from its previous “life” are a few scattered closeout groups. Since the economic crash of about five years ago, US based MC apparel makers have been cautious about new introductions of product and those that have come out tend to be reduced in features, material expense and price. European makers (such as Alpinestars and REV’IT!) have held the line on quality and consequently their pricing is higher also. Fieldsheer, for 2014, is positioning themselves above the quality/price of most US based makers and putting themselves several notches above where they were… up with the pricing and quality of the European brands. As of this writing, I’ve only reviewed two product lines and I’m pleasantly surprised. And while I don’t think this line will have quite the “fit and finish” of the slightly higher priced European makers, they are definitely a step or two above where they were and above their US based competitors. The feature lists and looks are excellent… the fit/finish and materials are very good. As I find over and over in this biz… if consumers compare MSRP of competing products, they’ll be looking at a pretty close indication of overall value (of course closeout items offer better “value”, but we are speaking of how MSRP is an indication of overall features, build quality and materials). Anyway, kudos for the owners of the Fieldsheer line for their confidence in upping their game and having confidence in the sport. :: Paul, 11-30-13
About this jacket: The Fieldsheer Lena 3.0 jacket is a medium weight street textile style with lots of comfort and convenience features. The length is somewhere between a short sport style jacket and a full 3/4 length touring jacket (like the Adventure Tour style), so you’ll still get decent coverage over the body, but, like I mentioned, it is more of a “medium” weight jacket. Please take a look at the series of close-up pictures in our photo gallery and you will see all the various features such as vents, pockets, etc. The climate control aspect of this jacket is a bit special and deserves some explanation. Many “waterproof” jackets are built with a permanent “mid-liner” which is a waterproof barrier between the jacket’s outer shell and the nylon liner on the inside (and in some cases the waterproof liner IS the inside lining). That liner arrangement is very good at keeping water out, but just by design limits the comfort of the jacket in hot weather because air passing through vents doesn’t reach the rider’s skin… the venting occurs only between the outer shell and inner lining of the jacket. But this design departs from most others in this segment because it combines a water-resistant (not waterproof mind you) shell, with a removable Nanomax waterproof liner. That means that when you use the various vents (and there are six in front and one in back (see the pics), you’ll get a LOT more cooling air reaching through the inside mesh liner to your skin. The waterproof liner is made to work with the removable thermal liner so that you can “mix and match” to suit the conditions. You can use one, or the other, or both. If you’re interested, here’s a brief video that gives you some info about Nanomax. You’ll quickly figure out which one (or none) to include for your rides and you’ll be able to stay comfortable in a very wide range of temps. The armor supplied for the shoulders and elbows is about like all other quality of armor you’ll find, and the back armor they supply is well above others in terms of overall sturdiness (just my humble opinion… not based on testing). I like the way this jacket is cut specifically for a ladies figure rather than some of the other textile styles that are more just “straight up and down” through the torso. This one definitely has a more flattering cut. :: Paul, 01-02-14