Icon Cheek Pads for Mainframe Helmets

  • Riders will sometimes need to change the cheek pads that come installed in their helmets. Some people need a little more or less space, while others simply need to install a fresh set of pads for better comfort (and smell).
  • The pads both come out and can be installed quite easily. Simply slide the pad into the shell and snap the closures into place.
  • Use the chart below to figure out what size cheek pad you currently have based on your helmet size, and then pick a replacement set based on your need.

Tweet_button Share this page on Twitter!

This Product is Currently Unavailable
Check out these similar products:
 

Sizing Information

Use the table below to determine what size cheek pads came standard with your helmet:

Helmet Size Cheek Pad Size Shell Size
XXS 45mm Medium
XS 40mm Medium
Small 35mm Medium
Medium 30mm Medium
Large 30mm Large
XL 25mm Large
XXL 20mm Large


You can buy the same thickness of cheek pad if you like the fit of your helmet and just need a replacement set. Or you can buy a different thickness cheek pad to adjust fit as long as you buy a pad to fit the same shell size. The cheek pads for the XS, Small and Medium helmets are interchangeable since those three sizes share the Medium helmet shell size. Likewise, the cheek pads for the Large, XL and XXL helmets are interchangeable since they all share an Large shell size.


Changing cheek pads to change the helmet fit: To get MORE room in your helmet, you need to buy a THINNER cheek pad. To get a TIGHTER fit, you need to buy a THICKER cheek pad. Example: If you have a size Large Mainframe helmet, you have cheek pads that are 30mm thick. If the helmet is too tight on you, a 25mm pad would give you more room.