HJC Cheek Pads for Sy-Max Helmets
- Riders will sometimes need to change the cheek pads that come installed in their helmets. Some people need a little more or less space, while others simply need to install a fresh set of pads for better comfort (and smell).
- The pads both come out and can be installed quite easily. Simply slide the pad into the shell and snap the closures into place.
- Use the chart below to figure out what size cheek pad you currently have based on your helmet size, and then pick a replacement set based on your need.
Share this page on Twitter!
View Larger ImagesCheck out these similar products:
Sizing Information
Use this table to determine what cheek pad size you currently have:
| Helmet Size | Cheek Pad Size | Shell Size |
|---|---|---|
| XS | 45mm | Small |
| Small | 45mm | Medium |
| Medium | 40mm | Large |
| Large | 35mm | Large |
| XL | 30mm | Large |
| XXL | 25mm | Large |
You can buy the same thickness of cheek pad if you like the fit of your helmet and just need a replacement set. Or you can buy a different thickness cheek pad to adjust fit as long as you buy a pad to fit the same shell size. There is only one cheek pad selection for the size XS, and only one selection for size Small. The cheek pads for the Medium, Large, XL and XXL helmets are interchangeable since they all share a large shell size.
Changing cheek pads to change the helmet fit: To get MORE room in your helmet, you need to buy a SMALLER cheek pad. To get a TIGHTER fit, you need to buy a LARGER cheek pad. Example: If you have a size Large Sy-Max helmet, you have cheek pads that measure 35mm. If the helmet is too tight on you, a 30mm pad would give you more room.
