AGV Cheek Pads for Horizon and Skyline Helmets
- Riders will sometimes need to change the cheek pads that come installed in their helmets. Some people need a little more or less space, while others simply need to install a fresh set of pads for better comfort (and smell).
- The pads both come out and can be installed quite easily. Simply slide the pad into the shell and snap the closures into place.
- Use the chart below to figure out what size cheek pad you currently have based on your helmet size, and then pick a replacement set based on your need.
Use this table to determine what cheek pad size you currently have:
|Helmet Size||Cheek Pad Size||Shell Size|
You can buy the same thickness of cheek pad if you like the fit of your helmet and just need a replacement set. Or you can buy a different thickness cheek pad to adjust fit as long as you buy a pad to fit the same shell size. The cheek pads for the XS, Small and Medium helmets are interchangeable since those three sizes share the medium helmet shell size. Likewise, the cheek pads for the Large, XL, XXL helmets are interchangeable since they all share a large shell size.
Changing cheek pads to change the helmet fit: To get MORE room in your helmet, you need to buy a THINNER cheek pad. To get a TIGHTER fit, you need to buy a THICKER cheek pad. Example: If you have a size Large Horizon or Skyline helmet, you have cheek pads that are 23mm thick. If the helmet is too tight on you, an 18mm pad would give you more room.
Note: As of this writing, our AGV distributor does not have replacement cheek pads for the XXL helmet. If at some point that size is available, we’ll get some in stock. 05/28/14