Held Ninja Gloves
- Palm made of unlined, colorfast specially treated Pittards leather
- Cowhide leather back with silk lining
- Maximum knuckle protection with carbon/Aramide molded armor
- Fingers and cuff protected with carbon leather panels backed with Temperfoam and Kevlar fiber
- Side of hand reinforced with doubled cowhide and protected with Schoeller® Keprotec and special foam
- Cooling air vent scoops on fingers
More Info: this document from Held explains some of the features listed above.
(not all Held models have all the features listed; use your back button after viewing)
Share this page on Twitter!
View Larger ImagesCheck out these similar products:
Sizing Information
Held gloves are sold in sizes that correspond to your hand measurement. Or, by using the chart below, you can choose a size based upon the size you normally wear in other gloves (most other gloves are sold in “alpha” sizes):
| Held Glove Size | Equivalent Alpha Size | Actual Hand Measurement |
| 7 | Small | 6.5” to 7” |
| 7.5 | Small | 7” to 7.5” |
| 8 | Medium | 7.5 to 8 |
| 8.5 | Medium | 8 to 8.5 |
| 9 | Large | 8.5 to 9 |
| 9.5 | Large | 9 to 9.5 |
| 10 | XL | 9.5 to 10 |
| 11 | XXL | 10 to 11 |
Our Two Cents
Get Held quality and protection at a more affordable price with the Ninja. This glove offers great protection features and it’s one of the few race gloves we have with venting (see the ports on the top of the fingers in the close-up pictures). Pittards leather is used in the palm of this glove. Pittards offers good feel and it’s specially treated to hold up against moisture from perspiration. The overall styling of this glove is very sharp with the molded knuckle protection and carbon-print leather patches.
